Use the catalogue dimensions to compare products, then request the current technical information for your selected model and intended installation.
Request a project quoteMultiple lengths are the slip formats listed in the catalogue, not box dimensions. Ask for confirmation of the selected model for packing, joints and corner pieces. Oxford packing values remain indicative until the current sheet is validated.
| Model | Code | Length × height (mm) | Thickness | Details |
|---|---|---|---|---|
| Amsterdam | C54 | 305 × 75 | 15 mm | Check Amsterdam |
| Berlin | C84 | 240 × 65 | 10 mm | Check Berlin |
| Berna | C82 | 240 × 70 | 15 mm | Check Berna |
| Bristol | C25 | 220 × 45 | 15 mm | Check Bristol |
| Belgrad | C60 | 245 × 65 | 15 mm | Check Belgrad |
| Corby | C58 | 210 × 60 | 14 mm | Check Corby |
| Oliva | C66 | 225 × 55 | 13 mm | Check Oliva |
| Oxford | C69 | 240 × 73 | 13 mm | Check Oxford |
| Ribe | C05 | 285 × 60 | 15 mm | Check Ribe |
| York | C61 | 230 × 65 | 20 mm | Check York |
| Alborz | P72 | 450 × 100 / 270 × 100 / 170 × 100 | 15 - 20 mm | Check Alborz |
| Aurora | P62 | 395 × 95 / 245 × 95 / 145 × 95 | 5 - 18 mm | Check Aurora |
| Bavaria | P70 | 400 × 120 | 10 - 20 mm | Check Bavaria |
| Cumbria | P16 | 495 × 95 / 300 × 95 / 200 × 95 | 10 - 40 mm | Check Cumbria |
| Everest | P03 | 235 × 48 | 20 - 25 mm | Check Everest |
| Himalaya | P12 | 480 × 95 / 280 × 95 / 190 × 95 | 10 - 40 mm | Check Himalaya |
| Izmir | T38 | 100 × 100 | 10 mm | Check Izmir |
| Kamen | P86 | 386 × 90 / 235 × 90 / 150 × 90 | 10 - 15 mm | Check Kamen |
| Nevado | P80 | 290 × 150 | 10 - 15 mm | Check Nevado |
| Tavas | T41 | 355 × 160 / 355 × 155 | 15 mm | Check Tavas |
| Thera | P30 | 250 × 65 | 10 - 18 mm | Check Thera |
| Tivoli | T90 | 395 × 295 | 15 mm | Check Tivoli |
| Asad decorative relief | L50 | Request current dimensions | 10 - 45 mm | Check L50 |
| Aztec decorative relief | M10 | Request current dimensions | 10 mm | Check M10 |
| BT385 decorative trim | BT385 | 305 x 50 | 20 - 25 mm | Check BT385 |
| BT386 decorative trim | BT386 | 305 x 50 | 10 - 20 mm | Check BT386 |
| BT387 decorative trim | BT387 | 305 x 12 | 10 - 12 mm | Check BT387 |
| Blazon decorative relief | B90 | 280 x 280 | 15 - 25 mm | Check B90 |
| BT384 decorative band | BT384 | 310 x 115 | 10 - 20 mm | Check BT384 |
| Maori decorative relief | F20 | 270 x 225 | 15 - 20 mm | Check F20 |
| G70 wood-effect wall cladding | G70 | 720 x 225 | 10 mm | Check G70 |
| D70 garden stepping stones | D70 | 720 x 225 | 35 mm | Check D70 |
| Roma decorative relief | R30 | 270 x 230 | 15 - 30 mm | Check R30 |
For wall and pier finishes, see the coping dimensions and the pier cap dimensions. Request the technical documents your project needs before installation. We do not publish unverified strength, frost or absorption values here.
Pier-cap and coping dimensions refer to the piece. For selection, provide finished support dimensions including the intended render or cladding. The 500 mm coping length does not include joints or end conditions.
Confirm the box count, stated coverage convention and allowance for cuts for each model. Oxford packing remains unconfirmed. Do not apply a single m²-per-box convention across the range, or add corner faces twice to the flat-slip area.
Send the project requirements when asking for current technical sheets, installation instructions and any applicable Declaration of Performance or CE documentation. The available catalogue is not evidence of a declared fire class, frost performance, slip rating or load capacity.
Describe the substrate, location, exposure and intended use. Adhesive, grout, joints, fixing and preparation must be agreed using the applicable product and system information. Do not infer compatibility from photographs or a concrete composition alone.
Documents to request with a quotation for coping, pier caps, brick slips or stone cladding: data sheet, instructions, DoP and CE marking.
Read the planning guideCurrent technical sheets and DoP or CE documents have not been supplied for publication here. A Declaration of Performance or CE documentation is not confirmed here for each product. Ask Ristone for the documents available for the selected product; their applicability and content are checked per product against your project requirements before ordering.
No. No fire classification is declared on this site. Ask for the applicable product documentation and have it checked against the project requirements.
Send the product or model, quantities or measurements, and the delivery country and town. If you need help with quantities, include the finished support dimensions, openings and corners as relevant.
Send the measurements or quantity schedule, selected finish and delivery destination. We will check the details for your quotation.
Request a project quote